Basic Info.
Operational Method
Continuous and Intermittent
Origin
UV LED Spot Light Source
Product Description
UV LED spot light source curing system
Model: GST-101D
UV LED spot light source application fields:
Optical instruments, optical communications products and crafts manufacturing
Electronic Components, hard drive and micro-motor manufacturing
Headphones and watch components manufacturing
Optical head for DVD/CD manufacturing
Our UV LED spot light source curing system has the following advantages:
More advantages
1. There is a number of patents as technical support.
2. Excellent illumination uniformity: There are lots of specially designed lens for ultraviolet radiation and they can enhance the bonding process performance.
3. The system uses a unique heat dissipation technology and doesn't need any fan to cool down it. Rapid cooling can ensure extended service life of the LED, and satisfy the optics and the electronics industry cleanliness requirements.
4. Constant current mode, intelligent optical mode and some other control strategy can meet the specialized needs of many industries.
5. The system has multi-functions: Each illumination head can be controlled separately. That means you don't need to buy 4 traditional lamp irradiation equipments which will cost you much money, instead, you can buy one UV LED curing system with 4 point light source to accomplish the same mission. This will greatly reduce your upfront investment.
6. The consistency and interchangeability of the light source are guaranteed because of the self-calibration memory function of themselves. The Light attenuation of the traditional lamp way is fast, and the individual differences are large, the illumination is also different, all these factors badly affect the quality of the products.
7. The system has an RS-232C communication Interface and it is easy to copy and upload the data.
8. The start/stop illumination can be controlled by footswitch or external I/O interface and it is easy for centralized control.
9. The fiber is very easy to be damaged if irradiating in the traditional lamp way; And the maintenance costs can be too high. However, the LED illumination head and the controller are connected by a dedicated cable, its bend radius is 1/3 the bend radius of fiber, so it's difficult to damage, and even no maintenance costs.
Working mode
Constant current mode: When working under this mode, you should set the parameter on the display (parameter means the percentage, equals to output UV power divide the total UV power), and time, which can be set from 0.1sec to 999.9sec. For example, when the parameter you set is 50%, time is 2sec, then at the time you press the foot pedal, the system will start countdown. Within 2sec, the outlet LED head outputs a 50% UV power (If the peak UV power is 8000mW/cm2, 50% means the output UV power is 4000mW/cm2). When time's up, UV light will be cut off automatically.
PWM mode: When you choose this mode, the parameter means duty cycle (0~100%). Once you press the pedal, the countdown started and the system will act a pulsed operation. This mode is especially for some UV adhesive that requires pulsed UV irradiance, making the UV light penetrate its inside to be fully cured and prevent from area shrinking.
Stepping mode: In this mode, the parameter means the steps, and there are totally 10steps. The parameter on the display means the steps. You can set every step with different UV power and emitting time. When the pedal is pressed, the system will start to work through the ten steps. When finished, the UV power will automatically be cut off. This mode can reduce the bonding stress of the UV adhesives.
Address:
No. (5-8)West, 16th Floor, Creative Building, Creating Industry Park, No. 9-2 Taihu Road(East), New North District, Changzhou, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Furniture
Company Introduction:
Changzhou Komboss ST Co., Ltd., is a global leader specializing in the UV curing field based on its competitive technology. KOMBOSS has been a pioneer in R&D of state-of-the-art UV curing light sources and equipments in China, filling in a blank of relevant domestic market. With rich experience in software R&D of UV equipment, hardware design and UV light source innovation, Good ST is committed to the UV curing revolution by innovative engineering and creative product design
China KomBoss Good ST Group---set up by KOMBOSS, American NEWLEDS and Japanese IKA Group together, was founded in 2008. They have established R&D, labs, production, marketing and service bases in Changzhou, China. The three brands---"IKA" "NEWWELLS" and "Good-ST", based on IKA′s core technology in Japan, combine NEWLEDS and KOMBOSS′s advanced core technology with well-capitalized power in China, marketing network and years of experience in international marketing service, were built to be the leader brands "KOMBOSS-ST" and "GOOD-ST" in the field of UV curing.