Basic Info.
Product Description
UV curing machine area light source curing system:
Unlike traditional UV lamps, which limits on heat sensitive materials and an external fan system is needed. This area light source offers industrial strength curing with a large illumination area for high process throughput, while ensuring uniform intensity from the center to the edge and enables printing on almost all kinds of substrates even on thin film, thin plastics, foam plastic (ceiling tile), paper, and leather
Service life
In tradition, the lamp life is only 800 ~ 3000 hours and then the equipment need to change lamp or repair. However, the lifeof our UV LED curing system can be 20000~30000 hours. It can be controlled irradiating only when needed, and the time is very accurate and short. When the operating time equals to the 1/5 preparing time, the service life of UV LED curing system will be 30-40 times the service life of lamp equipment.
No thermal radiation
Because of the use of pure high-power 365nm /395nm wavelength light-emitting diodes, there is no infra-red and other wavelengths of light to issue, and the temperature rise of irradiated area can be well-controlled below 5 ° C. Traditionally, the temperature rise of irradiated area always been 60-90 ° C, so that the products' location changed, and resulted in adverse products. There's no such defect in our products. The use of UV LED fit for lens bonding, electronic products bonding and optical fiber bonding.
Environment-friendly and pollution-free
The traditional equipments use high pressure mercury lamp to irradiate. There is a large number of mercury in the light bulbs, and it is very troublesome to handle them. They may cause serious pollution to the environment. However, our UV LED curing system uses LED to irradiate; It is environment-friendly and pollution-free.
Ultra high illumination
Our UV LED curing systems use High-energy LED chips and Special optical systems, the UV light can achieve high-precision, high-intensity irradiation, and in fact the illumination can be achieved 8600 mW/cm2. The latest optical technology and manufacturing process are used to achieve high-intensity output (more optimized than the mercury lamp irradiation and nearly 2 times the traditional LAMP irradiation light intensity). Because of this the UV adhesive will curing quickly, and shortens the production cycle, improve production efficiency significantly.
The illumination of single channel will reduce as the channel increase if irradiating by the traditional lamp way. However, the LED curing system won't reduce the illumination and all channels can be maintained at maximum.
Because of the high illumination, UV LED curing systems shortened the irradiation time and improve the production efficiency.
Energy saving
The irradiation efficiency is more than 10 times of the traditional lamp way.
Their differences are as follows:
LED: Nearly none energy consumption during Standby time and you can control the irradiation time
LAMP: High-pressure mercury lamp continuous irradiating regardless of whether Effective irradiation and the most of the energy wasted.
The saving energy of the UV LED can even be calculated as follows:
270(w)*8(hour)*365(day)= 800(KWh)
The result means that each UV LED curing system can save about thousands Yuan, what's more, it indirectly reduces carbon dioxide emissions about1.4 tons each year and that is to say, a car exhaust in one year.
High-reliability design
No matter circuit design, optical design, system optimization or the components selection, Good ST implements a consistent high-reliability design concept, so that we guarantee the stability of the equipment, reliability and consistency of curing.
Address:
No. (5-8)West, 16th Floor, Creative Building, Creating Industry Park, No. 9-2 Taihu Road(East), New North District, Changzhou, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Furniture
Company Introduction:
Changzhou Komboss ST Co., Ltd., is a global leader specializing in the UV curing field based on its competitive technology. KOMBOSS has been a pioneer in R&D of state-of-the-art UV curing light sources and equipments in China, filling in a blank of relevant domestic market. With rich experience in software R&D of UV equipment, hardware design and UV light source innovation, Good ST is committed to the UV curing revolution by innovative engineering and creative product design
China KomBoss Good ST Group---set up by KOMBOSS, American NEWLEDS and Japanese IKA Group together, was founded in 2008. They have established R&D, labs, production, marketing and service bases in Changzhou, China. The three brands---"IKA" "NEWWELLS" and "Good-ST", based on IKA′s core technology in Japan, combine NEWLEDS and KOMBOSS′s advanced core technology with well-capitalized power in China, marketing network and years of experience in international marketing service, were built to be the leader brands "KOMBOSS-ST" and "GOOD-ST" in the field of UV curing.